A pair of glazed doors, each leaf opening outward, turns a wall into a way through to the courtyard.
Each leaf carries a HOPPE Atlanta lever on both faces, so the doors open and lock from inside and out. The leaves are symmetrical, with the same sightlines, and swing outward so that the full width of the opening is free for furniture and passage.
The active leaf opens first; the second leaf follows when the full width is needed. Closed, the meeting stiles lock to each other and the seals run continuously around both leaves.
| Design | |
|---|---|
| Opening | Outward, two leaves on side hinges |
| Configurations | Pair; single leaf; with side lights and transom |
| Frame depth | 95 mm |
| Thermal break | Polyamide thermal-break strips in frame and leaf |
| Surface finish | Powder coating; anodising; dual colour inside / outside |
| Glazing | |
| Standard unit | 42 mm triple insulating glass, Low-E, warm-edge spacer; laminated safety glass to project |
| Hardware | |
| Handle | HOPPE Atlanta (1530 / 3346), lever on both faces |
| Locking | Multi-point lock on the active leaf; flush bolts on the passive leaf |
| Hinges | Surface-mounted door hinges sized to leaf weight |
| Sizes | |
| Size shown | 1828.8 × 2438.4 mm (72 × 96 in), pair |
| Range | Leaf size and weight set per project with the hinge rating |
| Performance | |
| Basis | Stated per configuration (size, glazing, operation) with its test documentation; test methods to GB/T 7106, EN 14351-1 or NAFS as required |
Planning data on this page describe the configuration shown and are examples to help plan a project; they do not define the full size range. Performance values are stated per configuration together with its test documentation. Details may change with technical development.
Ultra-high-precision extrusions engineered for wind load
High-performance polyamide strip for better thermal insulation
Automotive-grade safety glass: tempered, Low-E, warm-edge, multi-cavity with inert gas
Honeycomb foamed composite gasket of the grade used on high-speed rail
Custom fitting system by Kinlong & Liphing
Handles: HOPPE, Germany